Made from non-woven, alumina Oxide based, asbestos free, high purity, refractory fibers. This ceramic tape is an suitable insulator for a extruder heater barrel.

It offers:
~continuous service temperature of 2300 degrees Fahrenheit
~melting point temperature of 3200 degrees Fahrenheit
~outstanding thermal insulation
~low thermal conductivity and heat storage
~good dielectric strength
~high resiliency
~easily cut with standard scissors

Specifications:

• Temperature Range: -50° to +2300° F
• Heat Flow Rate (K-factor):  0.48 Btu/hr. x in./sq. ft. @ 800° F
• Density: 12 lbs./cu. ft.
• Thickness: 1/6" (1.5875mm)
• Width: 1" (25.4mm)
• Color: White

Sold in 1' (304mm) lengths. Please make a comment on your order, or contact us if you need continuous lengths.