Mendel Hardware

Timing Belt & Pulley GT2 Kit

in Mendel Hardware
$36.00

This is a kit which includes two GT2 timing belts & two GT2 timing pulleys.  The belts will be in open-ended lengths, & the pulleys include 2 set screws each.

Belt Specifications (2 belts included):

  • Pitch:  2mm
  • Length: 1164mm (45.83in)
  • Width:  6mm

Pulley Specifications (2 pulleys included):

  • Tooth: 20
  • Pitch:  2mm
  • Bore: 5mm
  • Material:  Aluminum
  • Max. Belt Width:  6mm

Timing Belt, GT2 1164mm

in Mendel Hardware
$9.00

This is a GT2 timing belt for use with GT2 timing pulleys.  This belt is sold in one open-ended length.

Specifications:

  • Pitch:  2mm
  • Length: 1164mm (45.83in)
  • Width:  6mm

Timing Pulley, GT2, 20 Tooth

in Mendel Hardware
$11.00

This is a GT2 pulley for use with T2 belts.  It will include two set screws.

Specifications:

  • Tooth: 20
  • Pitch:  2mm
  • Bore: 5mm
  • Material:  Aluminum
  • Max. Belt Width:  6mm

Prusa Mendel Threaded Rod Set

in Mendel Hardware
$40.00

This set includes all fifteen pieces of M8 zinc steel threaded rod needed to assemble Prusa Mendel.  The rods are nice and straight.   All studding and bar length cut to +0.8mm , - 0.0mm with ends ground and ready for use or filed further.

 Includes:

  • 2 pcs- 210mm
  • 4 pcs- 294mm
  • 6 pcs- 370mm
  • 3 pcs- 440mm

All rods are metric as required of the Mendel documents.

Prusa Mendel Smooth Rod Set

in Mendel Hardware
$30.00

This set includes all six pieces of 8mm stainless steel alloy 303, precision ground bar needed to assemble Prusa Mendel.  The rods are nice and straight.   All studding and bar length cut to +0.8mm , - 0.0mm with ends ground and ready for use or filed further.

 Includes:

  • 2 pcs- 420mm
  • 2 pcs- 406mm
  • 2 pcs- 350mm

All rods are metric as required of the Prusa Mendel documents.

Prusa Mendel Timing Belt Set- X & Y axis

in Mendel Hardware
$16.00

This belt set includes both timing belts needed to assemble Prusa Mendel.

Includes:

  • 2- 5/T5/990 timing belts (X, Y axis)

These are highly durable timing belts due to their hard-wearing polyurethane teeth and the constant-length galvanized steel tension members. The tooth profile allows enough room for chunky gear teeth. These are either sychroflex, optibelt, or other compatible profile depending on supplier availability. The compatibility is tested and guaranteed.

Advantages
• Higher power transfer – up to 30 % in comparison with conventional standard polyurethane timing belts
• Longer operational life thanks to optimized materials
• High level of flexibility thanks to optimized materials
• Runs in all conventional standard timing pulleys

*Note: Product color may be different than shown in image.

Prusa Mendel Hardware Kit (Metric)

in Mendel Hardware
$70.00

This RepRap Mendel hardware kit includes all the bolts, nuts, washers, threaded and smooth rod needed to build your Prusa Mendel. Most bolts, nuts, and washers come with a few extras in case one gets lost. The rods are nice and straight. It is all packed tight and ships well. All studding and bar length cut to +0.8mm , - 0.0mm ends ground and ready for use.

Includes:

6 - M2.5 Cap Screw 20mm
6 - M2.5 Nut
12 - M2.5 Washer
24 - M3 Cap Screw 10mm
16 - M3 Cap Screw 25mm
4 - M3 Cap Screw 40mm
40 - M3 Nut
70 - M3 Washer
2 - M4 Cap Screw 20mm
2 - M4 Nut
2 - M4 Washer
1 - M8 Hex Bolt 30mm
83 - M8 Nut
93 - M8 Washer
6 - M8 x 30 Fender Washer
3 - Bearing, 8mm x 22mm x 7mm
2 - M8 x 210mm zinc steel threaded rod
4 - M8 x 294mm zinc steel threaded rod
6 - M8 x 370mm zinc steel threaded rod
3 - M8 x 440mm zinc steel threaded rod
2 - 8mm x 350mm Stainless Steel Alloy 303, Precision Ground Bar
2 - 8mm x 406mm Stainless Steel Alloy 303, Precision Ground Bar
2 - 8mm x 420mm Stainless Steel Alloy 303, Precision Ground Bar

 

* Using 3/16" x 3/4" fender washer to replace M5x20 mudguard washer
All threaded rod, nuts, and bolts are metric as required of the Mendel documents.

Does not include extruder hardware, springs or belts

Original Mendel Threaded Rod Set

in Mendel Hardware
$40.00

This set includes all eighteen pieces of M8 zinc steel threaded rod needed to assemble Original Mendel.  The rods are nice and straight.   All studding and bar length cut to +0.8mm , - 0.0mm with ends ground and ready for use or filed further.

 Includes:

  • 4 pcs- 294mm
  • 2 pcs- 330mm
  • 2 pcs- 355mm
  • 6 pcs- 370mm
  • 2 pcs- 418mm
  • 2 pcs- 440mm

All rods are metric as required of the Mendel documents.

Original Mendel Smooth Rod Set

in Mendel Hardware
$30.00

This set includes all six pieces of 8mm stainless steel alloy 303, precision ground bar needed to assemble Mendel.  The rods are nice and straight.   All studding and bar length cut to +0.8mm , - 0.0mm with ends ground and ready for use or filed further.

 Includes:

All rods are metric as required of the Mendel documents.

Original Mendel Timing Belt Set- X, Y, & Z axis

in Mendel Hardware
$26.00

This belt set includes all three timing belts needed to assemble Original Mendel.  They are ready to use and do not need to be split. 

Includes:

  • 1- 5/T5/1380 timing belt (X axis)
  • 2- 5/T5/990 timing belts (Y, Z axis)

These are highly durable timing belts due to their hard-wearing polyurethane teeth and the constant-length galvanized steel tension members. The tooth profile allows enough room for chunky gear teeth. These are either sychroflex, optibelt, or other compatible profile depending on supplier availability. The compatibility is tested and guaranteed.

Advantages
• Higher power transfer – up to 30 % in comparison with conventional standard polyurethane timing belts
• Longer operational life thanks to optimized materials
• High level of flexibility thanks to optimized materials
• Runs in all conventional standard timing pulleys

*Note: Product color may be different than shown in image.